EPDM Lifeline Holders (Rope Guides) for RIB Tubes

Lifeline holder for RIB tubes

The lifeline holder (also called a rope guide, lifeline patch or rope fairlead) is a small rubber part glued to the side of the tube, through which the rope that runs round the boat passes: the lifeline. It holds the line along the tube so it can be grabbed, both on board and from the water. Several are fitted, evenly spaced, on each tube.

Specifications

Fitting or replacing a rope guide

• Remove the old, damaged rope guide and clean the area.
• Bond it with ORCA Glue neoprene adhesive mixed with ORCA RFE hardener, or the glue + hardener kit, following the ORCA gluing guide (PDF, in French).
• Keep the original spacing so that the lifeline stays taut along the tube.

Complete with EPDM handles, tube end cones and CEREDI valves.

Frequently asked questions

What is a rope guide for on a RIB?

It guides and holds the lifeline along the tube, so that it stays within reach and does not hang loose.

How many rope guides are needed?

It depends on the length of the tubes: keep your boat's original number and spacing, or space them evenly along the whole length.

Which glue should I use to fit a rope guide?

A two-part neoprene adhesive, such as ORCA Glue and its RFE hardener. For a PVC tube, contact us before ordering.