CEREDI Premium 9021 EPDM Tube End Cone (Ø 180/215 mm)
5-year warranty
Order shipped within 72 hours
Delivery 2-5 days
Return Policy 15 days
ABOUT THIS ITEM
The Premium 9021 cone by CEREDI Nautica is a compact EPDM tube end cone: Ø 180/215 mm and 40 mm high. It sits between the Millennium 9016 and the Classic 9017 in our range. It protects the tip of the tube from friction and knocks, and neatly replaces a damaged original cone.
- Who for: owners of RIBs and tenders, boatyards and repairers.
- What for: replacing a worn, unstuck or split tube cone, or finishing the end of a new tube.
- Dimensions: Ø 180/215 mm, height 40 mm (manufacturer's dimensions).
- Colours: black (RAL 9005), light grey (RAL 7035) and medium grey (RAL 7038).
- Material: EPDM resistant to UV and seawater, made in Italy.
- A compact size, one step up from the Millennium 9016.
- 3 colours: black, light grey RAL 7035 and medium grey RAL 7038.
Technical specifications
| Feature | Value |
|---|---|
| Manufacturer | CEREDI Nautica (Italy) |
| Manufacturer's reference | 9021 |
| Model | Premium |
| Material | EPDM (synthetic rubber) |
| Diameters | Ø 180/215 mm |
| Height | 40 mm |
| Colours | Black (RAL 9005), light grey (RAL 7035) and medium grey (RAL 7038) |
Which cone should I choose?
Measure the base of your old cone, or the end of the tube, then choose the model with the closest dimensions. If in doubt, send us a photo with your measurements and we will tell you which model is right.
| Millennium 9016 | Premium 9021 (this page) | Classic 9017 | Maxi Premium 9019 | |
|---|---|---|---|---|
| Diameters | Ø 165/125 mm | Ø 180/215 mm | Ø 230/200 mm | Ø 290/330 mm |
| Height | 40 mm | 40 mm | 45 mm | 45 mm |
| Colours | 4 | 3 | 3 | 3 |
| Size | The most compact | Compact | Intermediate | The largest |
Fitting the cone
- Peel off the old cone and remove any glue residue.
- Lightly sand the base of the cone and the tube area, then degrease both surfaces with solvent.
- On a Hypalon or neoprene tube, apply two thin coats of ORCA Glue mixed with RFE hardener to both surfaces, letting each coat dry.
- Position the cone, press firmly over the whole glued surface and leave to dry before re-inflating the tube.
Full details are in our ORCA gluing guide (PDF, in French). Would you rather have it fitted? See our repair partners.
Frequently asked questions
What is the difference with the Millennium 9016 and the Classic 9017?
The Premium 9021 (Ø 180/215 mm, height 40 mm) is wider than the Millennium 9016 (Ø 165/125 mm) and smaller than the Classic 9017 (Ø 230/200 mm, height 45 mm). Compare the dimensions with your old cone to choose.
Does the cone resist sun and seawater?
Yes. EPDM is a synthetic rubber that resists UV, ozone and salt water, without drying out or cracking in the sun.
Can it be fitted on a PVC tube?
Our ORCA Glue is designed for Hypalon and neoprene tubes. A PVC tube needs a PVC-compatible glue: contact us before ordering.
Goes well with
- Neoprene glue + hardener kit: the glue and its hardener together to fit the cone.
- ORCA Glue and RFE hardener sold separately, for workshops.
- ORCA Hypalon fabrics to repair or reinforce the tube around the cone.
- CEREDI EPDM handles to complete the tube fittings.
- Our article: changing or repairing a RIB tube.
- All our tube end cones.
