CEREDI Maxi Premium 9019 EPDM Tube End Cone (Ø 290/330 mm)
5-year warranty
Order shipped within 72 hours
Delivery 2-5 days
Return Policy 15 days
ABOUT THIS ITEM
The Maxi Premium 9019 is the largest CEREDI tube end cone in our range: Ø 290/330 mm and 45 mm high. It is designed for the widest tube ends, found on large RIBs. Moulded in EPDM, it replaces a damaged large original cone and protects the tip of the tube.
- Who for: owners of RIBs and tenders, boatyards and repairers.
- What for: replacing a worn, unstuck or split tube cone, or finishing the end of a new tube.
- Dimensions: Ø 290/330 mm, height 45 mm (manufacturer's dimensions).
- Colours: black (RAL 9005), light grey (RAL 7035) and medium grey (RAL 7038).
- Material: EPDM resistant to UV and seawater, made in Italy.
- The largest diameter in the range, for large tubes.
- 3 colours: black, light grey RAL 7035 and medium grey RAL 7038.
Technical specifications
| Feature | Value |
|---|---|
| Manufacturer | CEREDI Nautica (Italy) |
| Manufacturer's reference | 9019 |
| Model | Maxi Premium |
| Material | EPDM (synthetic rubber) |
| Diameters | Ø 290/330 mm |
| Height | 45 mm |
| Colours | Black (RAL 9005), light grey (RAL 7035) and medium grey (RAL 7038) |
Which cone should I choose?
Measure the base of your old cone, or the end of the tube, then choose the model with the closest dimensions. If in doubt, send us a photo with your measurements and we will tell you which model is right.
| Millennium 9016 | Premium 9021 | Classic 9017 | Maxi Premium 9019 (this page) | |
|---|---|---|---|---|
| Diameters | Ø 165/125 mm | Ø 180/215 mm | Ø 230/200 mm | Ø 290/330 mm |
| Height | 40 mm | 40 mm | 45 mm | 45 mm |
| Colours | 4 | 3 | 3 | 3 |
| Size | The most compact | Compact | Intermediate | The largest |
Fitting the cone
- Peel off the old cone and remove any glue residue.
- Lightly sand the base of the cone and the tube area, then degrease both surfaces with solvent.
- On a Hypalon or neoprene tube, apply two thin coats of ORCA Glue mixed with RFE hardener to both surfaces, letting each coat dry.
- Position the cone, press firmly over the whole glued surface and leave to dry before re-inflating the tube.
Full details are in our ORCA gluing guide (PDF, in French). Would you rather have it fitted? See our repair partners.
Frequently asked questions
What is the difference with the Classic 9017?
The Maxi Premium 9019 is much wider: Ø 290/330 mm against Ø 230/200 mm for the Classic 9017, with the same 45 mm height.
Does the cone resist sun and seawater?
Yes. EPDM is a synthetic rubber that resists UV, ozone and salt water, without drying out or cracking in the sun.
Can it be fitted on a PVC tube?
Our ORCA Glue is designed for Hypalon and neoprene tubes. A PVC tube needs a PVC-compatible glue: contact us before ordering.
Goes well with
- Neoprene glue + hardener kit: the glue and its hardener together to fit the cone.
- ORCA Glue and RFE hardener sold separately, for workshops.
- ORCA Hypalon fabrics to repair or reinforce the tube around the cone.
- CEREDI EPDM handles to complete the tube fittings.
- Our article: changing or repairing a RIB tube.
- All our tube end cones.
