CEREDI EPDM Tube Handle 280 mm – Black or Grey
Availability:
39 In stock, ready to be shipped
Availability:
53 In stock, ready to be shipped
Availability:
26 In stock, ready to be shipped
Availability:
50 In stock, ready to be shipped
5-year warranty
Order shipped within 72 hours
Delivery 2-5 days
Return Policy 15 days
ABOUT THIS ITEM
The CEREDI EPDM handle is a rubber tube handle to glue on the Hypalon tubes of RIBs and tenders. It is used to carry the tender, pull it up the beach, hold on in rough seas and climb back aboard after a swim. Its 280 × 110 mm base spreads the load over the tube fabric.
- What it is for: adding a handle or replacing a torn-off or damaged one.
- Material: EPDM rubber, resistant to UV, weather and abrasion.
- Dimensions: 280 × 110 mm base, height 55 mm.
- Colours: black, light grey RAL 7035, medium grey RAL 7038 or dark grey RAL 7046.
- Fitting: glued to a Hypalon (CSM/CR) tube with neoprene adhesive + hardener.
Specifications
| Feature | Value |
|---|---|
| Manufacturer | CEREDI Nautica (Italy), ref. 9035 |
| Type | Glue-on tube handle |
| Material | EPDM rubber |
| Dimensions | Base 280 × 110 mm, height 55 mm |
| Colours and references | Black NCA903503, light grey RAL 7035 NCA903501, medium grey RAL 7038 NCA903502, dark grey RAL 7046 NCA903504 |
| Fitting | Glued to a Hypalon (CSM/CR) tube |
Millenium or EPDM handle: which one should I choose?
| Handle | Base | Height | Feature | Colours |
|---|---|---|---|---|
| Millenium | 260 × 95 mm or 290 × 95 mm | 50 or 55 mm | A cleat at each end to tie off a line | Black, light grey RAL 7035, medium grey RAL 7038 |
| EPDM handle (this page) | 280 × 110 mm | 55 mm | Classic shape, wider base | Black, light grey RAL 7035, medium grey RAL 7038, dark grey RAL 7046 |
Gluing a handle on a tube
- Choose the position with the tube inflated, and mark the outline of the base.
- Clean and degrease the area and the base of the handle, for example with New Magic.
- Bond it with ORCA® Glue neoprene adhesive mixed with RFE hardener, or with the glue + hardener kit, following the ORCA gluing guide (PDF, in French).
- Press the whole base firmly and leave to dry for the time given in the guide before pulling on the handle.
Frequently asked questions
Can it be glued to a PVC tube?
It is designed for Hypalon (CSM/CR) tubes and is bonded with neoprene adhesive. For a PVC tube, contact us before ordering.
Which grey should I choose?
Compare with the colour of your tubes. For ORCA fabrics, use the colour swatch fan.
Complete the tube fittings with rope guides, tube end cones and CEREDI valves. All our handles are in the EPDM tube handles collection.