Go to content
📦 Free shipping from €250 excl. VAT

⭐ Preferential prices for professionals

📦 Free shipping from €250 excl. VAT

⭐ Preferential prices for professionals

Retubing d'un semi-rigide : remplacement des flotteurs

RIB retubing: price and tube replacement

Is your RIB getting on a bit? Are its tubes dull, sticky, porous or showing signs of lifting? When the hull and engine are still in good condition, it is not always necessary to replace the whole boat.

RIB retubing means completely replacing the old tubes with new, made-to-measure ones. This keeps a hull that is still sound while renewing an essential part of the boat.

Find out how retubing works, what affects its price, the differences between PVC and CSM/Hypalon and the main stages of replacing the tubes. ORCA Retail also presents the fabrics and fittings useful for this kind of project.

What is RIB retubing?

Retubing, also called tube replacement, involves removing the old inflatable tubes and fitting new ones designed to suit the existing hull.

Unlike a one-off repair, retubing covers all the tubes. It can be worthwhile when the damage is too extensive or too serious for a localised repair to be a satisfactory solution.

In particular, this work allows you to:

  • Renew ageing or badly damaged tubes.
  • Keep a hull and equipment that are still in good condition.
  • Choose a new fabric and, where technically possible, customise some colours and fittings.
  • Keep using the boat without necessarily having to buy a complete new RIB.

Whether the project is feasible depends, however, on the condition of the hull, the tube attachment system, the boat model and the availability of a professional able to carry out the replacement.

How much does RIB retubing cost?

The price of retubing depends mainly on the size and shape of the tubes, the material chosen, the fittings to be replaced and how complex the manufacture and fitting are.

As a rough guide, a range of 5,000 to 12,000 euros is quoted for replacing the tubes, depending on the size of the boat. This is an order of magnitude to be confirmed with professionals: the actual cost can vary considerably from one model to another.

Several factors can affect the quote:

  • The size and geometry of the tubes: these determine in particular the amount of fabric and the complexity of manufacture.
  • The material: the type of fabric and its characteristics affect the cost of materials.
  • Fittings: replacing valves, handles, rubrails or other parts can change the budget.
  • Preparation and fitting: removing the old tubes, preparing the hull and installing the new tubes are all part of the job.

Retubing can be an economically attractive alternative to buying a new boat if the hull, engine and existing equipment still meet your needs. To compare the two options, take into account the overall condition of the boat and the full cost of restoring it, rather than simply comparing the price of the tubes with that of a new boat.

Why replace the tubes of your RIB?

Tubes are exposed to conditions that speed up the ageing of materials and seams. Over time, several factors can contribute to their deterioration:

  • UV rays: prolonged exposure to the sun can alter the appearance and properties of the fabric.
  • Salt and humidity: deposits and storage conditions can contribute to the ageing of some components.
  • Rubbing and impacts: manoeuvring in harbour, contact with quays and transport can cause localised abrasion.
  • Natural ageing: the fabric, seams and fixings can eventually show signs of fatigue.

One-off repairs may be enough when the damage is limited. However, when problems multiply or affect several areas, an assessment will show whether full replacement is more appropriate.

See also our guide to knowing when to repair or replace the tubes of a RIB.

Retubing can renew the tubes while keeping a hull in good condition. On its own, however, it does not restore the whole boat to as-new condition: the engine, attachment systems and other equipment must also be inspected.

Which fabric should you choose for retubing: PVC or Hypalon?

Choosing the fabric is an important step in replacing the tubes. It should take into account the budget, how the boat is used, maintenance constraints and the characteristics of the original material.

PVC: an affordable solution

PVC is valued in particular for its generally affordable cost and its light weight. Depending on the fabric and its construction, the seams can be welded. Its characteristics and resistance to ageing vary, however, with the quality of the material and the conditions of use.

Before choosing a PVC fabric, check that it suits the way you use the boat and the boat's requirements. Not all PVC references should be considered equivalent in terms of durability.

CSM/CR, often called Hypalon: a material designed for demanding conditions

In the marine world, the term Hypalon is commonly used for CSM-based fabrics, combined with other elastomer components depending on their construction. These fabrics are sought after for their resistance to UV, abrasion and certain chemicals, particularly in demanding conditions of use.

They are an option worth considering for a RIB used regularly or exposed to the weather for long periods. Their cost, the assembly techniques and the products needed to work with them must nevertheless be taken into account.

Actual durability depends on the fabric chosen, the quality of manufacture, fitting, maintenance and boating conditions. No material can guarantee the same lifespan on every boat.

ORCA Retail offers several ranges of ORCA technical fabrics for marine applications, including the 820, 828 and 866 ranges. The right reference should be chosen according to the project and the characteristics required.

Discover ORCA technical fabrics

To learn more about the differences between the two materials, read our article PVC or Hypalon: which fabric should you choose for your RIB tubes?

How does tube replacement work?

Retubing generally involves several stages. Their exact order and the techniques used can vary depending on the boat model, its design and its attachment system.

The main stages are as follows:

1. Assessment of the hull and the old tubes

The professional examines the condition of the tubes, porous or damaged areas, seams and fixings. They also check that the hull can take new tubes and that replacement is a sensible solution.

2. Removal of the old tubes

The old tubes are deflated and then removed according to their attachment system: gluing, screwing, bolting or a combination of methods. The hull and mounting surfaces are then prepared to receive the new tubes.

3. Manufacture of the new tubes

The new tubes are made from new fabric using templates suited to the boat. The panels are cut and assembled using methods compatible with the chosen material.

Valves, handles, reinforcements and other parts planned for the project are built in during manufacture, according to the boat's needs.

4. Installation on the hull

The new tubes are positioned and fitted to the hull in line with the boat's design and the applicable technical recommendations. The fit and fixings must suit the model concerned.

5. Fitting reinforcements and accessories

Depending on the project, this stage can include fitting rubrails, bow reinforcements, valves, handles or other accessories.

ORCA Retail offers rubrails and valves for RIBs for compatible maintenance and manufacturing work.

6. Checks before relaunching

Before the boat goes back into service, the professional checks the fitting, the airtightness of the tubes and that the parts concerned work properly. The checks and test conditions must suit the boat and the work carried out.

To find a professional, see our network of RIB repairers.

Which ORCA Retail products for a retubing project?

Making or replacing tubes requires compatible materials and fittings. The right products depend on the fabric, the assembly method and the characteristics of the boat.

Always follow the manufacturers' instructions on surface preparation, glues, hardeners, application conditions and drying times. Material compatibility must be checked before any work.

RIB retubing FAQ

Can the tubes be replaced without changing the hull?

Yes, when the hull is sound enough and the model allows compatible new tubes to be made and fitted. A prior assessment is needed to check that the job is feasible.

How long do tubes last after retubing?

There is no guaranteed lifespan that applies to all tubes. The material, the quality of manufacture, boating conditions, sun exposure, maintenance and storage all affect how they age. Ask the fabric manufacturer and the professional carrying out the work for guidance suited to your project.

Is retubing better than buying a new boat?

Retubing can be worthwhile if the hull, engine and other equipment are in good condition and still meet your needs. If several other major parts also need replacing, buying another boat may be worth considering. The comparison should be based on the overall cost of the two solutions.

Can you choose a different colour or add reinforcements?

Depending on the model and technical constraints, a retubing project may allow you to choose certain colours and plan additional fittings or reinforcements. These options must be confirmed with the professional responsible for manufacture and fitting.

ORCA parts for a retubing

Give your RIB a second life with ORCA Retail

Retubing is a solution to consider when the tubes are too damaged to be repaired for the long term, but the hull and other equipment are still in good condition. The choice of fabric, the quality of manufacture and the care taken over fitting are essential to the success of the project.

ORCA Retail offers technical fabrics, glues and hardeners, as well as fittings for compatible tube manufacture, repair and replacement work.

Find out too how to renovate a second-hand inflatable boat and assess the work needed before making your decision.

Discover ORCA technical fabrics for your retubing project.

Previous article The art of marine and underwater photography: techniques, tips and exceptional locations in France
Following Sailing in the Baltic States : Estonia, Latvia, Lithuania